Chain/Sprocket, Raised Floor System, Building Constructional Component
Chain/Sprocket, Raised Floor System, Building Constructional Component
Sprockets for Standard Conveyor Chain
Mismatching of chain and sprocket will hurt smooth operation as well as shortening life of both chain and sprocket. Important points for sprocket are as follows.
Teeth contour and pitch must be accurate and uniform.
Sprocket must have strong wear resistance.
Sprocket structure must be robust with high shock resistance.
Dimension Table (PDF) |
|---|
Dimension table is showing standard sprocket. Additionally Hitachi can supply made to order design in size, material, with many kind of inner bore.
Pitch of Circle Diameter (P.C.D.) |
|---|
Pitch of Circle Diameter (P.C.D.) is calculated by this formula.
Pitch of Circle Diameter (P.C.C.) can be gained by multiplying coefficient as following format.
Hub Diameter and Hub Width |
|---|
Diameter and height, of standard sprocket are set as Dimension table (PDF). However, depending on environment made to order may be required, and the following format will help designing boss diameter and height.
 |
This is for quick and easy method. For more precious method, please refer to general guide for machine design. |
The files are in Adobe Acrobat Format. |
 |
