Conveyor Chain/Sprocket Lubrication(Oinling)

カテゴリ内リンク カテゴリ内リンク カテゴリ内リンク
Attachment Cutting and Joining Lubrication (Oiling)
カテゴリ内リンク カテゴリ内リンク カテゴリ内リンク
Maintainance andInspection Identifying and Correcting Problems  
カテゴリ内リンク カテゴリ内リンク カテゴリ内リンク

Lubrication (Oiling)

Lubrication of conveyor chains is extremely important. Without proper lubrication, the chain will run through its lifespan much more quickly. It is becoming more common for standard conveyor chains to be used in very harsh conditions, making lubrication even more important than before. In some cases, the usage environment may make lubrication impossible. Consult us in such cases.
This section explains oiling points, oiling methods, types of lubricant oil and related matters. Always observe these instructions when oiling chains.

Oiling Locations and Methods

Oiling Locations and Methods

Oil the chain at points (1) and (2) with a dropper or a brush.

Caution
  • When a new chain is first used, there is initial wear as the sliding surfaces run in, so oil as frequently as possible at that time.
  • Chains are treated with anti-corrosion oil when shipped, but they should be thoroughly oiled and greased before use, and should be run unladen for 30 minutes at first.

Types of Lubricant Oil

Commercially Available Lubricant Oil (Reference)

 

Manufacturer

Idemitsu Kosan

Japan Energy

Nisseki

Showa Shell

Viscosity

ISO VG

150

Daphne Super
gear oil 150

Reductus 150

Bonnoc SP150

Omala Oil 150

220

Daphne Super
gear oil 220

Reductus 220

Bonnoc SP220

Omala Oil 220
  • ※Manufacturer name is in no particular order.
Caution
  • Special oil is required if the ambient temperature falls to 0℃ or below, or rises to 50℃ or above. In some environments, oiling is not possible. Consult us in such cases.

Chain / Sprocket

  • Catalog Library
  • Q&A
  • Handling Chain / Sprocket
Top